Removing the door trim is relatively straightforward but a bit fiddly
| 1 | Remove the speaker and place out of harms way |
| 2 | Now the tricky bit is to place your arm in the speaker hole and undo the hidden nut and bolt as shown, in my case this required a 7mm socket, but others have found it required 8mm one. Hint on replacing dispense with the ordinary nut and use a wing nut instead |
| 3 | Unscrew the screw shown |
| 4 | Unclip the trim from the door |
| 5 | Unlatch the inner door handle from the door locking mechanism |
| 6 | Lift the trim up to go over the push button |